Silverfox Ultrasound Skin Treatment Device F-312B Only Used For Beauty
Ultrasound skin treatment with the F-312BĀ deviceĀ is a very pleasant and painless method. It consists in the use of generated vibrations, which in addition to micromassage also bring a gentle heating effect, thus adequately stimulating skin cells. Ultrasonic waves open the pores, so the skin is better able to absorb various active ingredients.
Advantages
Ā
- 10 intensity settings
- Timer
- Three operating modes
- START/PAUSEĀ
- LCD display
- 2 probes - for face and around eyes
Features
- Oxygenates the tissue
- Encourages the process of metabolism and enzyme production
- Micromassages deeper tissue layersĀ
- Promotes absorption of hydrophilic and lipophilic substances, vitamins
- Normalizes the condition of the skin
- Relaxes tense muscles
Specifications
- Model: F-312B
- Power AC 100V-240V,Ā 50/60Hz
- Watt: 11 W
- Product Size: 20.8x23x7.5 cmĀ
- Package Size (1PC) :360x275x140(mm)ā0.014mĀ³Ā Ā 14.1x10.8x5.5(in)ā846inĀ³
- Product weight: 2 kg
- Package weight: 2.6 kg
Replacement accessories
- Ultrasonic probe for eyes
- Ultrasonic probe for face
Operation Method
1. insert the Ultrasonic probe into the corresponding socket of the Equipment, When the equipment is connected tothe power cable properly, the "Power switch" is displayed in red. Press the "Power Switch" to enter into the working mode and it would show in white on the screen. The equipment defaults to the state of eye probe output; thus the energy output of level 1 is set to 15 minutes.
2. Various modes can be selected based on your need, press "Mode switch" to select the appropriate output modeĀ which are Positive output, negative output, and mixed output mode.
3. Press the "Time increase/decrease button" which allows you to set the Working time from 1-30 minutes.
4. Press the "Start"/"Pause "button to start the operation. The power energy level is adjustable which allows beingĀ set from level 1 to 10.
5. When you want the Ultrasonic probe to stop working during the operation you can press the "Pause" button.
6. Press the "power switch" to turn off the equipment when the operation is end, and the "power switch" will displayred at this time. Clean the Ultrasonic probe with 75% alcohol after unplugging the power plug, and store it in a dryplace.
Ā
Recommended using time
Adjust the time according to the thickness of the skin, usually the treatment time does not exceed 15 minutes.
Warning: Do not put the metal part of the probe in contact with water
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ultrasound skin treatment with the F-312BĀ deviceĀ is a very pleasant and painless method. It consists in the use of generated vibrations, which in addition to micromassage also bring a gentle heating effect, thus adequately stimulating skin cells. Ultrasonic waves open the pores, so the skin is better able to absorb various active ingredients.
Advantages
Ā
- 10 intensity settings
- Timer
- Three operating modes
- START/PAUSEĀ
- LCD display
- 2 probes - for face and around eyes
Features
- Oxygenates the tissue
- Encourages the process of metabolism and enzyme production
- Micromassages deeper tissue layersĀ
- Promotes absorption of hydrophilic and lipophilic substances, vitamins
- Normalizes the condition of the skin
- Relaxes tense muscles
Specifications
- Model: F-312B
- Power AC 100V-240V,Ā 50/60Hz
- Watt: 11 W
- Product Size: 20.8x23x7.5 cmĀ
- Package Size (1PC) :360x275x140(mm)ā0.014mĀ³Ā Ā 14.1x10.8x5.5(in)ā846inĀ³
- Product weight: 2 kg
- Package weight: 2.6 kg
Replacement accessories
- Ultrasonic probe for eyes
- Ultrasonic probe for face
Operation Method
1. insert the Ultrasonic probe into the corresponding socket of the Equipment, When the equipment is connected tothe power cable properly, the "Power switch" is displayed in red. Press the "Power Switch" to enter into the working mode and it would show in white on the screen. The equipment defaults to the state of eye probe output; thus the energy output of level 1 is set to 15 minutes.
2. Various modes can be selected based on your need, press "Mode switch" to select the appropriate output modeĀ which are Positive output, negative output, and mixed output mode.
3. Press the "Time increase/decrease button" which allows you to set the Working time from 1-30 minutes.
4. Press the "Start"/"Pause "button to start the operation. The power energy level is adjustable which allows beingĀ set from level 1 to 10.
5. When you want the Ultrasonic probe to stop working during the operation you can press the "Pause" button.
6. Press the "power switch" to turn off the equipment when the operation is end, and the "power switch" will displayred at this time. Clean the Ultrasonic probe with 75% alcohol after unplugging the power plug, and store it in a dryplace.
Ā
Recommended using time
Adjust the time according to the thickness of the skin, usually the treatment time does not exceed 15 minutes.
Warning: Do not put the metal part of the probe in contact with water
